MIRA Safety CBRN Decontamination Wipe Powered by DeconDust™

Rapid Chemical & Radiological Contaminant Removal for Skin, Gear & Surfaces

The MIRA Safety CBRN Decontamination Wipe is a rapid-response, individually packaged wipe engineered for immediate neutralization and removal of chemical warfare agents (CWAs), toxic industrial chemicals (TICs), and radioactive particles from skin, gear, equipment, and hard surfaces.

Each wipe is impregnated with DeconDust™ technology, which immediately neutralizes, adsorbs, or contains contaminants on contact. The viscose non-woven construction (100% rayon) delivers strong mechanical cleaning action while supporting effective decontamination performance. Classified as a Medical Device Class I in the EU for skin decontamination, these wipes are ideal for first responders, hazmat teams, healthcare staff, industrial workers, and anyone operating in high-risk environments.

Each wipe delivers fast, effective, and field-ready decontamination — even in life-critical scenarios where water is limited or unavailable.

Why You Need This CBRN Wipes

Instant Protection for Skin & Surfaces

Designated as a Class I non-sterile medical device, the wipe is approved for:

• Immediate decontamination of CWAs and TICs
• Small-area skin decontamination
• Decontamination of PPE, tools, equipment & hard surfaces

It neutralizes and removes contaminants when exposure poses:

• Primary risk to the individual, or
• Secondary transfer risk to others

Proven Effectiveness (Field & Lab Testing)

▶ Tested on Chemical Warfare Agents

• Sulfur Mustard (HD): Residual contamination is always below NATO permissible limits
• HD & VX (with Decontamination Mitts): Residual contamination 0 μg/cm²

These results demonstrate that the wipes eliminate chemical threats down to safe, controlled, and measurable levels — critical for military, hazmat, and emergency response operations.

Specifications

Key Features

DeconDust™ Neutralization

Proprietary formulation absorbs, neutralizes, and removes:

• Liquid chemical agents
• Toxic industrial chemicals
• Radioactive particulate contamination

Skin-Safe, Surface-Safe

• External use only
• Excess solution can be left on skin or surfaces when water isn’t available

Single-Use, Sealed, Sterile Packaging

• Individually wrapped to prevent environmental exposure
• Minimizes cross-contamination
• Perfect for field kits, Individual First Aid Kits, hazmat bags & go-bags

Works in Extreme Conditions

• Usable and storable from –40°C to +120°C
• Stays effective in arctic cold or desert heat

Long shelf life

• 5-year shelf life in original packaging for long-term storage.

Minimal Training Required

Designed for use even by untrained individuals who have:

• Basic awareness of chemical hazards
• Understanding of cross-contamination avoidance

How to Use

1. Identify the contaminated skin or surface.
2. Tear open the packet at the notch.
3. Remove and unfold the wipe completely.
4. Wipe thoroughly:
   • Skin
   • Gear
   • Protective equipment
   • Tools & hard surfaces
5. The wipe will absorb, neutralize, and remove liquid contaminants.
6. For skin: Rinse with water when available. If not, the residue can remain.
7. Dispose of the used wipe per local regulations.

If contamination persists, repeat with a fresh wipe.

Ideal Applications

• Hazmat & CBRN emergency response
• Military CBRN operations
• Firefighters & first responders
• Industrial chemical exposure mitigation
• Laboratory & research facilities
• Personal emergency preparedness & Individual First Aid Kits
• Equipment & gear decontamination

Safety Information

• For external use only
• Single-use — do not reuse
• Designed for layperson use after reading the included instructions
• Avoid contact with eyes (flush 15 minutes if exposure occurs)
• Do not use if the packet is compromised.
• Keep out of reach of children