MD-2 CBRN Kids Gas Mask Respirator with PAPR

This child escape respirator is rated to block mustard gas, which is the standard used for testing CBRN masks and hoods. Beyond that, it depends on the filter you use. If you use a ParticleMax P3 filter, it will only block particles. If you use an NBC-77 SOF filter, it will block particulates, plus CBRN agents. With the VK-530 filter, it will block CBRN threats and oxidize carbon monoxide for fire escape purposes.

So long as this system is used with the appropriate filter, it will work. Just make sure this mask isn't exposed to very high heat, as it is not made for hot ash falling on top of it. For volcanic eruptions and wildfires, we would suggest going with a multigas filter like the NBC-77 SOF, or VK-530, as they filter a wide array of contaminants.

A set of four CR123 batteries will last about 8 hours with continuous use. The time the filter will last depends on a few factors, including the contaminant type, concentration, breathing rate, along with atmospheric conditions. Generally speaking, a filter should last a full day under normal use conditions. If you are in an environment with very high concentrations of contaminants, use time will be reduced. I would suggest looking at the technical specs of the NBC-77 SOF Filter for an exact answer. The MD-2 Kids Gas Mask can be turned on or off, as needed.

This mask is suitable for children as young as 2 up to and including small teens. It also fits children as young as a few months old, but due to the risk of them removing it, we only recommend it for ages 2+. Unfortunately, we currently don't have any products for infants or babies.

Yes, as long as the filter you are using with the mask can filter smoke and/or Carbon Monoxide. One example is our VK-530 smoke filter.

Yes, the filter can be swapped with any 40mm NATO threaded filter. That specification is based on the single Israeli NBC filter that this unit comes with. Click here for the specifications on this filter cartridge.

Yes, this system is reusable. If you are using this for viral threats, you can use a ParticleMax P3 filter instead of an NBC/CBRN filter, as it would be more cost-effective. For safety, we recommend using one filter per day, as you can decontaminate the outside housing of a filter cartridge, but not the inside (where the filtration paper is). this system will run for around eight continuous hours with one set of four CR123A batteries. Disinfection depends on the threat. If the threat is viral, we recommend using Allegro respirator wipes, or their cleaning solution. The blower weighs 1.8lb with the filter installed and can be attached via a back harness, or an included belt clip. The mask itself weighs 1.4lb.

We have had customers fly with this product, without issue. I would check with the specific airline you're planning on using, as rules may differ.

The MD-2 uses a PAPR (powered air-purifying respirator) system that works under positive pressure. There is a constant flow of air going into the mask, which dramatically lowers breathing resistance and makes it easier to use for children. The MD-1, on the other hand, works like a standard negative pressure gas mask. The child would have to use their lung power to suck air through the filter. We only suggest the MD-1 as a budget-friendly option if the child has the lung capacity to blow up a balloon. If not, we recommend going with the MD-2 as an alternative. Overall the MD-2 is a superior product as it lowers breathing resistance, has a wider field of view, comes with a hydration system, and the blower can also be used with all of our adult masks once the child outgrows the mask. Please keep in mind, you can use a PAPR system with the MD-1 as well, although the MD-1 does not come with it as a standard accessory.

Your child can sleep in a car seat while wearing this, but it is vital to monitor the child to ensure they are comfortable, and the device is properly working. There is a built-in exhalation valve, but it is not meant as a failsafe. The function of this valve is to allow air to escape under positive pressure and keep contaminated air out. The hood and tubing are submersible for cleaning and disinfection. Yes, you can use this device with your adult respirator as a PAPR, and 45 l/min would be enough for physical activity. We would suggest you train with the PAPR to ensure you're fit enough to perform these activities while wearing the mask. The P3 filter does have two plugs on it that need to be removed before use.

This mask seals around the neck with a special diaphragm. Considering this device works through positive pressure, even if there is a small gap in the seal, contaminants will be kept out as internal air is being pumped out at 45 l/min.

Great question, Julie. We do not have a solution as of right now but will be releasing a product later this year. Make sure to sign up to our newsletter to stay tuned.

Yes, we have a Powered Air Purifying Respirator (PAPR) that's compatible with the CM-6M Gas Mask, CM-7M Gas Mask, and even with the MD-1 Kid's Mask (click here for the link to the MB-90 PAPR). Its blower system provides up to 90 liters per minute of constant airflow.

Yes, you can use rechargeable CR123A batteries. There is no USB connection, so it cannot be powered with an auxiliary battery pack.

The MD-2 Child Escape Respirator will fit the 12-year-old but might be a bit small for the 18-year-old. If the 18-year-old is smaller than an average teenager, it should fit.

It is the combination of the mask and filter that gives it a CBRN rating. To provide more context, when testing personal protective equipment for CBRN threats, labs typically do a mustard gas test in accordance with MIL-STD-282 (method 204.1.1.). This product went through this test and was shown to provide 240 minutes of protection.