MIRA Safety MOPP-1 CBRN Protective Suit and Mopp Gear

  • Advanced semipermeable construction for superior breathability and extended wear time.
  • Embedded carbon spheres for effective filtration and enhanced protection.
  • Durable, reusable design withstands 10 decontamination washes.
1
Regular price $899.95

OUR PRODUCTS ARE TRUSTED BY PROFESSIONALS ALL OVER THE GLOBE

We have established firm relationships with agencies worldwide and are deployed by:

United States Department

The United States

DEPARTMENT OF DEFENSE

Czech Ministry

Czech Republic

MINISTRY OF DEFENSE

Turkmenistan Ministry

Turkmenistan

MINISTRY OF INTERIOR

Turkey Ministry

Turkey

MINISTRY OF INTERIOR

South Africa Ministry

South Africa

MINISTRY OF INTERIOR

Romania Ministry

Romania

MINISTRY OF DEFENSE

Portugal Ministry

Portugal

MINISTRY OF INTERIOR

Lithuania Ministry

Lithuania

MINISTRY OF INTERIOR

Arms of Latvia

Latvia

MINISTRY OF INTERIOR

Ukraine Ministry

Ukraine

MINISTRY OF DEFENSE

Shop with Confidence

1 year factory warranty

5 years on select products

Free shipping for

all U.S. orders

Got a question before you order?

Call us at 888-316-1462

Description

The MIRA Safety MOPP-1 CBRN Protective Suit provides next-generation protection from chemical, biological, and even nuclear threats.

Whereas most traditional MOPP Gear is engineered to be impermeable, the MIRA Safety MOPP-1 CBRN Protective Suit has the same advanced semipermeable construction as the suits used by the US Military.

Thanks to its special construction that includes an integrated layer of embedded carbon spheres, this MOPP Gear effectively “breathes” while providing total body protection to the user. As a result, it can be worn for much longer periods in hazardous environments because the risk of exhaustion or dehydration is reduced.

It’s also engineered to be far more durable than the average CBRN MOPP Gear. With its semi-permeable construction, the MOPP Suit is designed to be worn during active duty use and for long periods in response to elevated threat levels. Most hazmat suits are designed for one-time use, but the MIRA Safety MOPP-1 CBRN Protective Suit will last a minimum of 30 days under average use conditions and up to 10 decontamination washes.

If the suit and user are not exposed to direct CBRN threats, the suit can be worn for up to 10 years, presuming it is not damaged or compromised.

Featuring superior puncture resistance and a digital camouflage pattern, the MIRA Safety MOPP-1 CBRN Protective Suit is a top-tier solution that protects against chemical warfare agents (CWA) and toxic industrial chemicals (TIC).

 

Key Features of the MIRA Safety MOPP-1 CBRN Protective Suit

  • Semipermeable construction like the MOPP Suits used by the U.S. military
  • Enhanced ventilation enables longer use compared with traditional hazmat suits, even in extreme environments
  • Embedded, activated carbon spheres that filter the ambient air
  • Designed for long-term use
  • Flame retardant, according to ISO 6940:2004
  • Can be washed up to 10 times at 40°C (104°F) to decontaminate after potential exposure
  • Lightweight (5.5 lbs.) to enable mobility and minimize fatigue
  • Integrated hood that adapts to fit respirators
  • Compatible with all MIRA Safety gas masks and most CBRN respirators/hoods
  • Front zipper with covering flap for easy donning and maximum protection
  • One-piece coverall design to reduce the possibility of vapor and gas ingress
  • Includes a hermetically sealing storage bag and pump
  • Minimum 10-year shelf life when stored in its original packaging in appropriate storage conditions
  • Made in the Czech Republic

 

The Next Generation of Protective CBRN Suits

The MIRA Safety MOPP-1 CBRN Protective Suit delivers protection above and beyond anything else available on the civilian market today.

Indeed, it’s even superior to the protective gear trusted by most military, police, and professional operators worldwide. Most entry-level biohazard suits are only designed to provide limited protection for workers on a job site and are designed to be replaced after a single day’s use, with more focus on affordability than extended protection.

Higher-grade hazmat suits can provide a wider range of protection, but they’re also limited in that they are impermeable. So, in addition to keeping threats out, they keep air out too. As a result, the use time for these types of hazmat suits is limited. When performing work that requires strenuous effort, users can become dehydrated or exhausted after as little as an hour of work.

The first MOPP Suits were developed to solve a specific challenge for the military—allowing soldiers to maintain maximum readiness and mobility without compromising on protection from gas and vapor threats.

The MOPP-1 is the latest evolution of protective suits, engineered to provide all-day comfort and protection from direct exposure to deadly chemical and toxic threats. It’s available in multiple sizes to fit various body types.

When stored in its original packaging in appropriate conditions (see below), the MOPP-1 CBRN Protective Suit will last ten years.

Remember, when wearing a MOPP Suit, users will require the addition of a functioning full-face respirator, a properly CBRN-rated filter, butyl gloves, and boots to ensure proper protection from airborne contaminants, radioactive particles, and other threats.

For storage after use, we recommend purchasing clothing storage bags that are hermetically sealed and come with a hand pump. These bags usually feature a double zip and a triple seal valve, ensuring a perfect hermetically-seal that will reduce the size of your MOPP-1 Suit by up to 50% for easier long-term storage.

MOPP Suit Storage

The MOPP-1 CBRN Protective Suit should be stored either in the original packaging at temperatures from -30°C to +50°C or in a hermetically sealed bag, with a relative humidity of up to 80% and without direct exposure to sunlight or heat sources.

Under these conditions, the suit’s shelf life is at least ten years.

MOPP Suit Cleaning and Maintenance

After exposure or use, the CBRN MOPP-1 Suit should be cleaned and disinfected according to the manufacturer's instructions included with the packaging. Your MOPP-1 Suit can be washed up to 10 times in this manner without compromising its protective abilities. Once a suit has been washed ten times, remove it from rotation. Never use a MOPP Suit that is not properly disinfected and decontaminated. In case of doubt, dispose of the suit in accordance with local regulations, and use a new one. The MOPP-1 Suit requires zero end-user maintenance. If a suit is compromised, torn or cut, DO NOT attempt to repair it.

Technical Specifications

 

Structural Parameters EN ISO Specification Tolerance
Weave EN 40161 Ripstop
Global composition EN 40110 64% Lenzing FR/30% Meta-aramid/5% Para-aramid/1% Antistatic (+/- 3%)
Weight (g/m2) EN 40339 220 (+/- 5%)
Width (cm) EN 1773 155 (+/- 1%)
Mechanical Qualities Method Values
Tensile strength warp EN 13934-1 700 N
Tensile strength weft EN 13934-1 500 N
Tear strength warp EN 13937-2 20 N
Tear strength weft EN 13937-2 20 N
Pilling EN 12945-2 5
Abrasion EN 12947-2 >80.000 cycles
Dimensional Stability to Washings Method Values
Warp EN 25077 <3%
Weft EN 25077 <3%
Normative Level
EN 11612 Protective clothing - Clothing to protect against heat and flame.
A1 A2 B1 C1 F1
EN 1149-3 Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
Pass
Flame Retardant ISO 6940:2004


MOPP-1 TECHNICAL PRODUCT TESTING

samples

The details of the received sample are presented in Table 1.

Table 1: Received sample

Sample code MIRA Description by Customer received
21pq0928 AvEc-Ms-1-BATCH 1 04-05-2021
Test Method

The detailed description of the test procedures is presented in the Annex.

Results

The test results are presented in the Tables 2 and 3. Note that the test results are only applicable to the tested material, mentioned in Table 1.

Table 2: Laid droplet, diffusive flow HD, 10 g/m? (5% RH, 30°C, 24 hours, 1ul drops)

Sample code penetrated amount (ug/cm?)
21PQ0928A <0.05
21PQ0928B <0.05
21PQ0928C <0.05

Table 3: Vapour test, HD, target concentration 11 mg/m? (80% RH, 30°C, 6 hours, wind speed 5 m/s)

Sample code Challenge
(mg/m3)
Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
21PQ0928A 12 0.33 <3.7
21PQ0928B 12 0.33 <3.8
21PQ0928C 12 0.34 <3.7
Samples

The details of the received samples are presented in Table 1.

Table 1: Received samples

Sample code Description by Customer received
20PQ2305 Outer shell: 0QAMEU0476, open ripstop with DWR&FR finish, new 04-11-2020
20PQ2306 Filter layer: ALLGO0002N, sphere filter, 345 g/m2 3 ply filter with 04-11-2020 non woven white and sphere active carbon and black knit, new 04-11-2020
20PQ2307 Outer shell: 0AAMEU0476, open ripstop with DWR&FR finish,pie 10x washed ISO 6330, 4N, tumbler dry low temperature 04-11-2020
20PQ2308 Filter layer: ALL60002N, sphere filter, 345 g/m2 3 ply filter with non woven white and sphere active carbon and black knit, 10x washed ISO 6330, 4N, tumbler dry low temperature 04-11-2020
Test Method

The detailed description of the test procedures is presented in the Annex.

Results

The test results are presented in the Tables 2 through 9. Note that the test results are only applicable to the tested materials, mentioned in Table 1.

Table 2: Laid droplet, convective flow 5 m/s, HD, 10 g/m? (80% RH, 30°C, 24 hours, 1)

Sample code State Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
20PQ2306/20PQ2305A New 2.2 482
20PQ2306/20PQ2305B New 2.2 347
20PQ2306/20PQ2305C New 2.3 485
20PQ2308/20PQ2307A Washed10x 1.3 181
20PQ2308/20PQ2307B Washed10x 1.3 268
20PQ2308/20PQ2307C Washed10x 1.5 292

Table 3: Vapour test 5 m/s, HD, target concentration 11 mg/m? (80% RH, 30°C, 6 hours)

Sample code State Challenge
(mg/33)
Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
20PQ2306/20PQ2305A New 11 2.2 65
20PQ2306/20PQ2305B New 11 2.6 80
20PQ2306/20PQ2305C New 11 2.8 107
20PQ2308/20PQ2307A Washed10x 11 1.3 25
20PQ2308/20PQ2307B Washed10x 11 1.3 14
20PQ2308/20PQ2307C Washed10x 11 1.5 28

Table 4: Vapour test 1 m/s, HD, target concentration 55 mg/m? (80% RH, 30°C, 6 hours)

Sample code State Challenge
(mg/33)
Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
20PQ2306/20PQ2305A New 56 0.11 <12
20PQ2306/20PQ2305B New 56 0.11 <12
20PQ2306/20PQ2305C New 56 0.9 <14
20PQ2308/20PQ2307A Washed10x 56 0.7* <20
20PQ2308/20PQ2307B Washed10x 56 0.7* <20
20PQ2308/20PQ2307C Washed10x 56 0.7* <20

Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.

Table 5: Vapour test 5 m/s, GD, target concentration 11 mg/m® (80% RH, 30°C, 6 hours

Sample code State Challenge
(mg/33)
Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
20PQ2306/20PQ2305A New 11 1.8 60
20PQ2306/20PQ2305B New 11 1.9 51
20PQ2306/20PQ2305C New 11 1.9 68
20PQ2308/20PQ2307A Washed10x 11 1.6 38
20PQ2308/20PQ2307B Washed10x 11 1.5 48
20PQ2308/20PQ2307C Washed10x 11 1.5 29

Table 6: Vapour test 1 m/s, GD, target concentration 55 mg/m3 (80% RH, 30°C, 6 hours)

Sample code State Challenge
(mg/33)
Velocity through sample
(cm/s)
Penetrated dose
(mg.min/m3)
20PQ2306/20PQ2305A New 55 0.07 <14
20PQ2306/20PQ2305B New 55 0.10 <10
20PQ2306/20PQ2305C New 55 0.10 <10
20PQ2308/20PQ2307A Washed10x 55 0.07* <16
20PQ2308/20PQ2307B Washed10x 55 0.07* <16
20PQ2308/20PQ2307C Washed10x 55 0.07* <16

Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.

Table 7: Laid droplet 0.5 m/s diffusive flow HD, 10 g/m? 30°C, 24 hours, 1ul drops)

Sample code State Penetrated amount
(ug/cm2)
20PQ2306/20PQ2305A New <0.08
20PQ2306/20PQ2305B New 1.0
20PQ2306/20PQ2305C New <0.08
20PQ2308/20PQ2307A Washed10x <0.08
20PQ2308/20PQ2307B Washed10x <0.08
20PQ2308/20PQ2307C Washed10x <0.08

Table 8: Laid droplet 0.5 m/s, diffusive flow GD, 10 g/m? (80% RH,30°C, 24 hours, 1ul drops)

Sample code State Penetrated amount
(ug/cm2)
20PQ2306/20PQ2305A New 0.53
20PQ2306/20PQ2305B New 0.32
20PQ2306/20PQ2305C New 0.14
20PQ2308/20PQ2307A Washed10x 0.12
20PQ2308/20PQ2307B Washed10x <0.06
20PQ2308/20PQ2307C Washed10x 0.10

Table 9: Laid droplet, diffusive flow LVAP, VX, 10 g/m? (5% RH, 30°C, 24 hours, 1ul drops)

Sample code State Penetrated amount
(ug/cm2)
20PQ2306/20PQ2305A New 1.0
20PQ2306/20PQ2305B New 0.93
20PQ2306/20PQ2305C New 0.21
20PQ2308/20PQ2307A Washed10x 0.30
20PQ2308/20PQ2307B Washed10x 0.41
20PQ2308/20PQ2307C Washed10x 0.48

PRODUCT CARE INSTRUCTIONS

  • PREPARE ITEM BY ZIPPING UP ALL POCKETS
  • WASH IN WARM WATER ONLY
  • NO DETERGENT
  • TUMBLE DRY UNTIL ITEM IS THOROUGHLY DRY

MOPP Suit Size Guide

The MOPP-1 CBRN Protective suit is available in three different sizes (available as size pairs):

  • Small - Medium (SM/MD)
  • Large - Extra Large (LG/XL)
  • 2X Large -3X Large (2XL/3XL)

 

SM/MD LG/XL 2XL/3XL
Chest Girth- measures over the biggest bulk of the breast just under the armpit 78-86 86-94 94-102 102-110 110-118 118-129
Waist Girth- measures the smallest part of the upper body 66-74 74-82 82-90 90-98 98-106 106-117
Person's Height- measures the total length from the head to ground 156-164 164-172 172-180 180-188 188-196 196-204
***Dimensions in cm


Mission Oriented Protective Posture (MOPP) Protective Levels Guide

In the US Army, understanding MOPP levels is crucial for personnel to maintain safety during various exercises and real-world scenarios. MOPP is a commonly used acronym for mission-oriented protective posture and outlines the required garments, gear, and actions airmen must take in response to different levels of hazard. This includes donning overboots for additional protection and being prepared for various threats such as radiation, nerve agents, and biological threats. Implementing these protocols effectively ensures that soldiers are ready to respond to emergencies.

For instance, Airman 1st Class personnel must be familiar with each MOPP level, from MOPP Level 0, where minimal personal protective equipment (PPE) is necessary, to MOPP Level 4, which demands full gear, including a protective mask and gloves. These measures ensure that airmen are prepared to handle harmful threats such as biological agents at an air base. Emergency management protocols often highlight the importance of these levels in article displays to ensure that every airman knows how to properly use their MOPP kit. The following table provides a detailed overview of each MOPP level, ensuring that airmen are always ready to protect themselves and continue their mission effectively.

Level What's Worn Description
MOPP 0 Carry a protective mask. Ensure that individual protective gear is within arm's reach.
MOPP 1 Suit worn. Mask, gloves, and boots carried. Airmen wear the suit and carry the mask, gloves, and boots, preparing for potential hazards.
MOPP 2 Suit and boots are worn. Gloves and mask carried. Airmen wear the suit and boots, while carrying gloves and mask, ready for an increased threat level.
MOPP 3 Suit, boots, and mask worn. Gloves carried. Airmen wear the suit, boots, and mask, with gloves carried, indicating a high threat of hazardous exposure.
MOPP 4 All protection is worn.
 
 


Mastering MOPP Levels: Essential CBRN Gear for Military Readiness

Understanding and implementing MOPP levels isn't just about following procedures; it's about ensuring readiness and safety in unpredictable environments. It's far better to know how to wear protective gear and not need it than to need it and not be able to properly wear it. It's important to remember that being prepared can make all the difference in critical situations. Stay ready by familiarizing yourself with MOPP protocols and practicing regularly.

Given that world politics are changing, we may or may not resort to these protective measures frequently, but we must be vigilant. Knowing what our enemies may deploy in terms of chemical, biological, or radiological threats is crucial. Therefore, understanding and being proficient in MOPP levels ensures that you can respond effectively when needed. Remember, it's always better to be over-prepared and safe than caught off-guard and vulnerable.

QUESTIONS & ANSWERS

Ask a Question
  • Does the suit provide camouflage from thermal?

    If you mean to be invisible or mitigate FLIR visibility, then the answer is no, it does not.

  • Does this suit come complete with gloves and boots?

    The butyl gloves and boots are sold separately.

Reviews

Customer Reviews
4.5 Based on 2 Reviews
5 ★
50% 
1
4 ★
50% 
1
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • moth balls
  • shoulders
  • objects
  • suit
  • size
A
12/07/2023
Austin SVG verified by SHOP
United States United States

I trust these guys with my life y’all should too!

A
05/01/2023
Anonymous
United States United States

Size matters

I'm barrel-chested,so it's tight around the shoulders and back, however I can still move and work in it just fine. Be careful about bending over, moving large objects. A larger size might be what I need. The suit is very durable though. Do not store near moth balls.