The MOPP-1 CBRN Protective Suit should be stored either in the original packaging at temperatures from -30°C to +50°C or in a hermetically sealed bag, with a relative humidity of up to 80% and without direct exposure to sunlight or heat sources.

Under these conditions, the suit’s shelf life is at least ten years.

MIRA Safety Protective CBRN Gloves (like all butyl rubber gloves) should be stored in their original packaging in a dark room, at a temperature between 41°F and 77°F, with a relative humidity of less than 75%. In these conditions, these gloves can be stored for fifteen years. Manufacturer advises these gloves can be stored at temperature extremes of -50°C to 60°C (-58°F to 140°F) if needed. These gloves are 100% butyl rubber and should be handled as such, so inspect for cracking, especially in flexion spots after use.

MIRA Safety Combat CBRN overboots should be stored in their original packaging in a dark room at a temperature between 32°F and 86°F (0-30°C), with a relative humidity of less than 80%. This equipment can be stored for ten years or longer in these conditions. These overboots should be protected from sunlight and stored away from chemicals and solvents. Overboots may be stacked.

Store Kappler ChemTape® in a cool, dry place away from direct sunlight. The ideal storage temperature is 73ºF (23ºC). According to the manufacturer, there is no evidence that ChemTape® loses its protective characteristics, including adhesion, when stored in ideal conditions. ChemTape® may be stored at temperatures of up to 120ºF (49ºC). Note that high temperatures may lead to faster degradation. 

Fitting over your existing combat boots, our Combat CBRN Overboots add a layer of practical protection from CBRN threats—without sacrificing the flexibility or mobility that matters most.

Our Combat CBRN Overboots feature a unique vinyl plastisol construction. The material has a dense chemical structure that boosts resistance to chemical warfare threats while remaining impermeable to nuclear and biological threats. It’s a tough but flexible material that’s perfect for this kind of application.

These overboots are designed to be easily donned or removed even when you’re wearing thick hazmat gloves. The single strap closure is attached to the boot to ensure a snug and comfortable fit. 

Weighing in at less than 4.4lbs total, they won’t impede tactical maneuvering or long-range capability. And they’re durable enough to be worn multiple times (decontaminate as needed).

Combining protection you can count on with the flexibility you need to get the job done, MIRA Safety Combat CBRN Overboots are the perfect fit.

ChemTape® is ideal for situations where the user might be exposed to chemical splashes. ChemTape® should NOT be fully immersed. ChemTape® uses a pressure-sensitive adhesive, so applying a high degree of pressure is crucial for application. Do not wrinkle or fold the tape when applying.